航空发动机适航审定喘振与失速影响因素

将气动热力基础理论与适航领域工程问题有机结合,对典型的喘振和失速影响因素开展了系统的研究,发展了一套多影响因素作用下航空发动机稳定裕度快速预估方法;在此基础上以JT9D发动机为研究对象,开展了喘振和失速主要影响因素的影响规律研究,结果显示对风扇部件稳定裕度影响权重最大的是进气畸变,对增压级和高压压气机影响权重最大的是寿命期内结构衰变。研究结果进一步明确了喘振和失速适航条款符合性验证活动的关键要素,完善了条款适航符合性验证流程,为进一步提升我国民用发动机适航审定能力提供了技术支撑。     

TGO非均匀增长对热障涂层应力演化和破坏机理的影响

采用内聚力模型和热生长氧化层(TGO)非均匀增长子程序,数值模拟了在热循环载荷作用下热障涂层(TBC)内部应力演化规律和开裂行为。涂层失效过程首先是源自陶瓷层(TC)内近波峰位置的拉伸和切应力共同主导的陶瓷层Ⅰ、陶瓷层Ⅱ混合型裂纹;随着循环数增加,则转向由TC内近波峰位置的切应力主导的Ⅱ型裂纹和波峰波谷中间的涂层厚度方向拉伸应力主导的Ⅰ型裂纹。整体非均匀增长和波谷均匀增长模式下的最大拉伸应力经过一定循环数后几乎不再随循环数而增加;而在波峰均匀增长和整体均匀增长模式下,最大拉伸应力则会随着循环数增加持续增长。整体非均匀增长、波谷非均匀增长模式下,20个循环后最大切应力出现在近波峰位置,分别为-16241 MPa和-15428 MPa;而整体波峰均匀增长和整体均匀增长模式下,最大切应力为-11382 MPa和-11198 MPa。对于波谷均匀增长和整体非均匀增长模式,在9个循环后出现界面裂纹。而对于波峰均匀增长和整体非均匀增长模式,在第17个循环出现界面裂纹。     

Numerical Simulation of Rotor Flow Field Based on Overset Grids and Several Spatial and Temporal Discretization Schemes

A numerical method based on solutions of Euler/Navier-Stokes (N-S) equations is developed for calculating the flow field over a rotor in hover. Jameson central scheme, van Leer flux-vector splitting scheme, advection upwind splitting method (AUSM) scheme, upwind AUSM/van Leer scheme, AUSM+ scheme and AUSMDV scheme are implemented for spatial discretization, and van Albada limiter is also applied. For temporal discretization, both explicit Runge-Kutta method and implicit lower-upper symmetric Gauss-Seidel (LU-SGS) method are attempted. Simultaneously, overset grid technique is adopted. In detail, hole-map method is utilized to identify intergrid boundary points (IGBPs). Furthermore, aimed at identification issue of donor elements, inverse-map method is implemented. Eventually, blade surface pressure distributions derived from numerical simulation are validated compared with experimental data, showing that all the schemes mentioned above have the capability to predict the rotor flow field accurately. At the same time, vorticity contours are illustrated for analysis, and other characteristics are also analyzed.     

自主导航控制及惯性技术发展趋势

从协同化、体系化、一体化适应未来战争的信息化,跨域化、高速化、多用化适应未来战争的立体多维化,自主化、平台化、小型化适应未来战争的无人智能化3个方面概述了未来战略新常态下武器装备对自主导航控制的需求,进而对自主导航控制这一概念进行了简要概述.从精确打击入手,阐述了惯性技术对自主导航的重要性,提出惯性技术是自主导航控制的核心.最后,从惯性器件、惯性传感技术、惯性测试、新功能材料、新兴算法和软件技术等方面分析总结了惯性技术的发展趋势,并对我国惯性技术的发展提出了一些建议.     

低雷诺数下50°后掠三角翼的旋涡流动

采用数值模拟和流动显示的方法研究了50°后掠角三角翼在低雷诺数下的旋涡流动,结果表明:低雷诺数下,非细长三角翼在5°攻角时就形成了稳定的前缘涡,较小攻角时前缘主涡就开始破裂,并观察到泡型和螺旋型两种旋涡破裂方式。另外,在一定的攻角范围内,前缘主涡的外侧又生成一对新的集中涡,构成双涡结构;随着攻角的增大,前缘涡涡核不断升高,主再附线向中心移动,二次分离区扩大。     

Vision-based pose estimation for cooperative space objects

Imaging sensors are widely used in aerospace recently. In this paper, a vision-based approach for estimating the pose of cooperative space objects is proposed. We learn generative model for each space object based on homeomorphic manifold analysis. Conceptual manifold is used to represent pose variation of captured images of the object in visual space, and nonlinear functions mapping between conceptual manifold representation and visual inputs are learned. Given such learned model, we estimate the pose of a new image by minimizing a reconstruction error via a traversal procedure along the conceptual manifold. Experimental results on the simulated image dataset show that our approach is effective for 1D and 2D pose estimation.     

基于计算机视觉/GPS/MG姿态测量的盲人行走组合导航方法研究

电子导盲辅助装置(ETA)是解决盲人出行困难的重要手段,而导航是ETA的关键技术.现有的ETA主要用GPS来定位定向,但在城市环境中经常存在GPS信号遮挡导致导航信息丢失的问题.针对该问题,利用视觉导航短时间内定位精度高,输出连续的优点以及 MG(Magnetic Gravity)姿态测量可补偿姿态积累误差的优点,提出一种基于视觉、GPS和MG姿态测量的盲人行走组合导航算法.该方法构建系统误差模型并以Kalman滤波为框架.仿真和实验结果表明,提出的组合导航算法准确度优于单独的导航算法,满足盲人户外安全出行导航的需求.     

基于双框架控制力矩陀螺的航天器动量管理

为减小维持大型航天器的姿态稳定和降低能量消耗的动量管理中的扰动力矩对姿态稳定的干扰,设计了周期性抑制滤波器。姿态控制的执行机构采用双框架控制力矩陀螺群（DGCMGs）,应用KENNEL操纵率,使航天器执行机构的角动量在本体系的x轴分量和偏航角可达稳定,同时角动量在本体系的z轴分量和滚转角可在较小的范围内振荡。数值仿真结果验证了方案的可行性。     

Sliding mode control of reaction flywheel-based brushless DC motor with buck converter

Reaction flywheel is a significant actuator for satellites’ attitude control. To improve output torque and rotational speed accuracy for reaction flywheel, this paper reviews the modeling and control approaches of DC-DC converters and presents an application of the variable structure system theory with associated sliding regimes. Firstly, the topology of reaction flywheel is constructed. The small signal linearization process for a buck converter is illustrated. Then, based on the state averaging models and reaching qualification expressed by the Lee derivative, the general results of the sliding mode control (SMC) are analyzed. The analytical equivalent control laws for reaction flywheel are deduced detailedly by selecting various sliding surfaces at electromotion, energy consumption braking, reverse connection braking stages. Finally, numerical and experimental examples are presented for illustrative purposes. The results demonstrate that favorable agreement is established between the simulations and experiments. The proposed control strategy achieves preferable rotational speed regulation, strong rejection of modest disturbances, and high-precision output torque and rotational speed tracking abilities.     

On-orbit determination and adjustment of electrostatic accelerometer lever arm

In order to ensure the proof mass center of electrostatic accelerometer (EA) is fixed at the center of gravity of satellite as precisely as possible, an on-orbit determination and adjustment strategy of EA lever arm is presented in this paper. The EA lever arm is determined using the observations of EA, gyro and magnetometer first. Then it is adjusted by screw slider mechanism. The simulation results demonstrate that the proposed strategy can be carried out several times to yield better accuracy. Meanwhile, the optimal geographic location for EA lever arm determination along each axis is found.